Introduction to Blink Camera WiFi 2.4 or 5

Blink cameras are like watchful eyes that guard your home, day and night. They are silent sentinels that keep you safe, even when you are away. However, many users are still determining which WiFi frequency to use: 2.4GHz or 5GHz. Both frequencies have advantages and disadvantages, so choosing the right one for your needs is important.

Some Blink cameras, such as the Blink XT2 and Blink Indoor, can connect to 5GHz WiFi networks. However, the original Blink and XT cameras can only connect to 2.4GHz WiFi networks. It is important to check the specifications of your Blink camera before attempting to connect it to a 5GHz WiFi network.

Why can Blink XT1 not work with 5GHz and XT2 work?

The Blink XT1 was released in 2017, while the Blink XT2 was released in 2019. One of the key differences between the two cameras is that the XT2 uses a newer Wi-Fi chip that supports both 2.4GHz and 5GHz networks.

There are a few reasons why the Blink XT1 does not support 5GHz networks:

  1. Cost: 5GHz Wi-Fi chips are typically more expensive than 2.4GHz chips. This is a factor in the decision to use a 2.4GHz chip in the XT1, especially since 5GHz support was not a major priority at the time.
  2. Power consumption: 5GHz networks consume more power than 2.4GHz networks. This is because 5GHz networks use shorter wavelengths, which require more energy to transmit and receive. The Blink XT1 is a battery-powered camera, so it is important to minimize power consumption.
  3. Range: 5GHz networks have a shorter range than 2.4GHz networks. This is because 5GHz signals are more easily absorbed by obstacles. The Blink XT1 is designed to be used both indoors and outdoors, so it is important to have a good range.

Overall, the decision not to include 5GHz support in the Blink XT1 was likely a combination of cost, power consumption, and range considerations.

Some third-party workarounds allow you to connect Blink XT1 cameras to 5GHz networks. However, these solutions still need to be officially supported by Blink, and they may not work reliably.

Blink Camera WiFi 2.4 or 5 Network Channel: Which is Best?

Blink cameras are mostly compatible with 2.4 GHz WiFi networks. 5 GHz WiFi networks are generally faster and more reliable than 2.4 GHz networks but have a shorter range and less penetration through walls.

If you have a Blink XT2 or Blink indoor camera, we recommend keeping your Blink cameras on the 5 GHz network. In contrast, if you have original Blink and XT cameras, we recommend keeping your Blink cameras on a 2.4 GHz network.

Which WiFi frequency is best for you?

It depends on your individual needs. If you have a large home or outdoor area and need a good range, then 2.4GHz WiFi is a good option. If you have a smaller home or apartment and need the fastest possible speeds, 5GHz WiFi is a better choice.

Understanding WiFi Frequencies

  • 2.4GHz WiFi is still the most widely used frequency band globally, but it’s becoming increasingly congested. This is because more and more devices are using 2.4GHz WiFi, including smartphones, tablets, laptops, TVs, streaming devices, and smart home devices. As a result, 2.4GHz WiFi can be slow and unreliable in crowded areas.
  • 5GHz WiFi is a newer, less congested frequency band with faster speeds and less interference. However, 5GHz WiFi has a shorter range than 2.4GHz WiFi. You may need a WiFi extender or mesh networking system for good 5GHz WiFi coverage throughout your home.
  • Several new technologies are being developed to improve the performance of WiFi. For example, WiFi 6E is a new WiFi standard that uses the 6GHz frequency band. 6GHz WiFi offers even faster speeds and less interference than 5GHz WiFi. However, 6GHz WiFi is still in its early stages of adoption and has yet to be widely supported by devices.
  • WiFi signals can be affected by various environmental factors, such as weather conditions, building materials, and even the furniture in your home. For example, rain and snow can absorb WiFi signals, and metal objects can reflect them. This can lead to dead spots in your WiFi coverage.
  • Other electronic devices, such as smart TVs, wireless printers, microwaves, cordless phones, and baby monitors, can also interfere with WiFi signals. This is because these devices operate on the same frequency bands as WiFi.
  • Engineers are developing new ways to improve the performance of WiFi in challenging environments. For example, one company is developing a new WiFi antenna to focus WiFi signals through walls and other obstacles.

If you are still trying to decide which WiFi frequency is best for you, you can use a WiFi analyzer app to see which frequency has the best signal strength in your home.

Why Does Blink Camera Need WiFi?

Blink cameras need WiFi for the following reasons:

  1. To send video footage: Blink cameras record video footage in real-time and send it to the Blink cloud servers over WiFi. This lets you view the footage live or review it later on your smartphone or tablet.
  2. To receive notifications: When your Blink camera detects motion or sound, it sends a notification to your smartphone or tablet over WiFi. This lets you be alerted to any potential security threats at your home.
  3. To receive firmware updates: Blink cameras regularly receive firmware updates over WiFi. These updates include security patches and new features.

Additional Details about how Blink Cameras use WiFi

  • Blink cameras use WiFi to connect to the Blink Sync Module. The Sync Module is a device that connects to your router and allows your Blink cameras to communicate with the Blink cloud servers.
  • Blink cameras use a secure WiFi connection to protect your data. The connection is encrypted using the latest security standards.
  • Blink cameras can be connected to both 2.4GHz and 5GHz WiFi networks. However, connecting your Blink cameras to a 5GHz network is recommended as it offers faster speeds and less interference.

2.4GHz vs. 5GHz: What’s the Difference?

2.4GHz

  • It uses longer wavelengths, which can travel further and penetrate obstacles more easily, making it a good choice for larger homes and outdoor areas.
  • More susceptible to interference from other devices, such as cordless phones, microwaves, and baby monitors, leading to slower speeds and dropped connections.
  • 2.4GHz has a wider range of compatible devices, including older devices.

5GHz

  • It uses shorter wavelengths to carry more data and provide faster speeds.
  • Less susceptible to interference from other devices.
  • It has a shorter range and can be more difficult to penetrate obstacles.
  • Has a narrower range of compatible devices, excluding older devices.

Additional details

  • 5GHz is often less crowded than 2.4GHz, leading to better performance in congested areas.
  • 5GHz is a newer frequency and less widely supported by devices than 2.4GHz.
  • 5GHz is more directional than 2.4GHz, meaning that the signal travels in a straighter line. This can be beneficial in some cases, such as when you need to connect to a device that is far away. Still, it can also be a disadvantage if there are obstacles.

Setting Up Your Blink Camera on a 2.4GHz Network

How to change Wi-Fi Network

To set up your Blink camera on a 2.4GHz network, you will need to:

  1. Connect your Blink camera to a power source.
  2. Download the Blink app on your smartphone or tablet.
  3. Open the Blink app and create an account.
  4. Tap the “+” button to add up a new camera.
  5. Select the “Blink Indoor” or “Blink Outdoor” camera, depending on your camera type.
  6. Follow the on-screen guidelines to connect your camera to your WiFi network.

Setting Up Your Blink Camera on a 5GHz Network

To set up your Blink camera on a 5GHz network, you will need to:

  • Create a separate 5GHz network on your router.
  • Connect your Blink camera to a power source.
  • Download the Blink app on your smartphone or tablet.
  • Open the Blink app and create an account.
  • Tap the “+” button to add a new camera.
  • Select the “Blink Indoor” or “Blink Outdoor” camera, depending on your camera type.
  • Follow the on-screen instructions to connect your camera to your 5GHz WiFi network.

Optimizing your Blink Camera’s WiFi Connection

Blink Security Camera System Tips, Tricks and Fixes!
  • Position your Blink camera in a strategic vantage point of your home, where it can capture a clear view of all important areas. This will help ensure the signal strength is strong and even throughout your home. Avoid placing your camera in corners or near other devices that emit radio waves, such as remote controls, Bluetooth devices, microwaves, and cordless phones.
  • Use a WiFi extender if you have a large home or outdoor area to monitor. A WiFi extender can assist in boosting the signal strength and widen the range of your WiFi network.
  • Ensure your router’s software is the latest version to optimize its performance and security. Firmware updates often include security improvements and performance enhancements.
  • Choose the right WiFi frequency. Blink cameras support both 2.4GHz and 5GHz WiFi networks. 2.4GHz networks have a longer range but are more susceptible to interference from other devices. 5GHz networks have a shorter range but offer faster speeds and less interference. If you have a small home or apartment, 5GHz is a good option. If you have a large home or outdoor area to monitor, 2.4GHz is a better choice.
  • Create a robust WiFi password that is difficult to guess, and update it periodically to maintain the security of your home network. A strong WiFi password will help to protect your network from unauthorized access. Be sure to change your password every few months to keep your network secure.
  • Enable WPA2 encryption on your router. WPA2 encryption is the most secure type of WiFi encryption. Enable WPA2 encryption on your router to protect your network from unauthorized access.
  • Consider using a VPN to encrypt your traffic. A VPN scrambles all the data you send or receive online, making it unreadable to hackers who try to intercept it. If you are concerned about privacy, a VPN is a good option.

Additional Tips for Optimizing

  • If your Blink camera is located in an area with weak WiFi reception, use a powerline adapter to connect it directly to your router for a stronger and more reliable signal. A powerline adapter transmits a WiFi signal using your home’s electrical wiring. This can be a good option if you have a large home or your Blink camera is in a difficult-to-reach area.
  • Use a mesh WiFi system. A mesh WiFi system is a blanket of WiFi that envelops your home, keeping you connected wherever you go. This can be a good option if you have a large home or areas with weak WiFi signals.
  • Use a directional WiFi antenna. A directional WiFi antenna can focus the WiFi signal in a specific direction. This can be a good option if your Blink camera is located in a difficult-to-reach area or there are obstacles between your camera and your router.

Troubleshooting Blink Camera WiFi Connection Issues

Speed Up Your Home Wi-Fi by Changing ONE Simple Setting!
  • Restart your router and your Blink camera. Mostly, restarting fixes minor issues with your WiFi connection.
  • Reset your Blink camera. This will remove all your settings and restore your camera to its factory defaults. If you still have trouble connecting your camera to your WiFi network, try resetting it.
  • Check your WiFi password. Verify that you are entering the correct WiFi password when connecting your Blink camera to your router.
  • Move your Blink camera closer to your router. This will help to amplify the signal strength.
  • If you use a WiFi extender, try moving it to a different location. Sometimes, WiFi extenders can interfere with the WiFi signal from your router.
  • Identify and eliminate any devices interfering with the WiFi signal, such as microwaves, cordless phones, and Bluetooth speakers. Microwaves, cordless phones, and other devices that emit radio waves can interfere with the WiFi signal. Try moving your Blink camera away from these devices.
  • Update the firmware on your router. Firmware updates often include security improvements and performance enhancements.

If you need help connecting your Blink camera to your WiFi network, contact Blink customer support for assistance.

Conclusion

Setting up your Blink camera on a 2.4GHz or 5GHz network is relatively straightforward. However, there are a few details that you should be aware of, such as the potential for interference and the need to manually enter the network name and password when using a hidden network. If you have trouble connecting your Blink camera to your WiFi network, try the troubleshooting tips above or contact Blink customer support for assistance. Tips for Optimizing Your Blink Camera’s WiFi Connection

J. Shaw

Joseph Shaw is a renowned expert with two decades of experience in health and fitness, food, technology, travel, and tourism in the UK. His multifaceted expertise and commitment to excellence have made him a highly respected professional in each field.

J. Shaw has 192 posts and counting. See all posts by J. Shaw

Comments are closed.