If you have a Blink camera, you may have experienced low or weak WIFI signals at some point. When you’re striving to monitor your house or property, this might not be very pleasant. This article will thoroughly discuss 9 easy ways to fix low and weak WIFI signals to blink camera.

The 9 Easy Ways to Fix Low and Weak WIFI Signals to Blink Camera

1. Check your Network Speed

The first thing you should do is to check your network speed. If you have slow internet, this could be causing your Blink camera to have weak WIFI signals. Please check your internet connection speed using a speed test website.

How do you check your network speed?

There are several different ways to check your network speed. Here are a few of the most popular methods:

  • Use a speed test website. This is the easiest and most common way to check your network speed. Many speed test websites, such as Speedtest.net, Fast.com, and Ookla Speedtest, are available.

To use a speed test website, visit the website and click the “Run Speed Test” or “Go” button. The website will then test your download and upload speeds.

Use your router’s settings page. Many routers, such as Asus, Linksys, Netgear, TP-Link, and D-Link, typically have a built-in speed test feature. To access this feature, log in to your router’s settings page and look for a section labeled “Speed Test” or “Bandwidth Test.”

Once you’ve found the speed test feature, click the “Run Test” button. The router will then test your download and upload speeds.

  • Use a mobile app. Many mobile apps can be used to check your network speed. Some popular speed test apps include Speedtest by Ookla, Fast by Netflix, and Meteor.

Install any internet speed-checking app on your mobile device after downloading it if you want to utilize a mobile speed test app. Then, open the app and tap the “Run Test” button. The app will then test your download and upload speeds.

How to Check Your Internet Speed with Ookla Speed Test | Ookla Speed Test App

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

2. Restart Your WIFI

Restarting your WIFI router can be one of the easiest solutions to fix low and weak WIFI signals to Blink cameras because it can help resolve a number of temporary issues that may be causing performance problems.

When you restart your router, it clears its memory and reloads its firmware. This can help to fix any minor glitches or errors that may have been causing your Blink camera to have weak WIFI signals.

Additionally, restarting your router can also help to force it to reconnect to the internet. This can be helpful if your router has been experiencing connectivity problems or if there have been any changes to your internet service.

To give your WIFI router a fresh start, unplug it from the power outlet for a few seconds and then plug it back in. Once your router has restarted, it will take a few minutes for it to reconnect to the internet and for your Blink camera to reconnect to the router.

Restart your router regularly, even if you’re not having any problems. This can help to prevent performance issues from developing.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

3. Move Your Blink Camera Closer to Your Router

It is another easy method to fix low and weak WIFI signals to blink cameras.

  • The closer your Blink camera is to your router, the stronger the WIFI signal. This is because WIFI signals weaken as they travel over a distance.
  • Move your Blink camera to within 10-15 feet of your router. This is the ideal range for most Blink cameras.
  • You can use a WIFI extender if you can’t move your Blink camera closer to your router. WIFI extenders boost the signal from your router so that your Blink camera can receive a stronger signal.
  • To use a WIFI extender, place it between your router and your Blink camera. The WIFI extender will then amplify the signal from your router and send it to your Blink camera.

Tips for Moving Your Blink Camera Closer to Your Router

  • Consider the layout of your home. If possible, place your Blink camera in a central location in your home. This will help ensure the camera has a strong WIFI signal throughout the home.
  • Keep your Blink camera away from other electronic devices that could interfere with its signal. Electronic devices can interfere with WIFI signals, so keeping your Blink camera away from them is best.
  • If you’re using a WIFI extender, place it where it can receive a powerful signal from your router.

Benefits of Moving Your Blink Camera Closer to Your Router

  • Stronger WIFI signal
  • More reliable performance
  • Fewer connection problems
  • Better video quality

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

4. Change Your Network Channel

You must access your router’s settings page to change your network channel. The easiest way to get to your router’s settings page is to type its IP address into a web browser.

Once logged into your router’s settings page, look for a section labeled “Wireless” or “WIFI.” In this section, you should find a setting labeled “Channel.”

Your router’s current channel will be selected. To change the channel, select a different number from the drop-down menu.

Once you have selected a new channel, click the “Save” button. Your router will then restart and start using the new channel.

Which channel should I choose?

Speed Up Your Home Wi-Fi by Changing ONE Simple Setting!

The best channel to choose will vary depending on the other wireless networks in your area. To find the best channel, you can use a WIFI analyzer app to scan for other wireless networks and see which channels they are using.

Once you have a list of the channels used by other networks, you can choose a channel that is not used or used by very few networks.

If you have a dual-band router, you can switch to a 5GHz network to improve the performance of your Blink camera. 5GHz networks are generally faster and more reliable than 2.4GHz networks but have a shorter range. Some Blink cameras can connect to 5GHz Wi-Fi networks, like Blink XT2 and indoor cameras, but not all. Check the specifications of your Blink camera to see if it is compatible with 5GHz Wi-Fi.

Please follow the following steps to switch to a 5GHz network for your Blink camera:

  1. Launch the Blink app on your mobile device or tablet.
  2. Open the menu by tapping the menu icon in the top left corner of the screen.
  3. Tap Settings.
  4. Tap on WIFI.
  5. Select your 5GHz network from the list of available networks.
  6. Enter the password for your 5GHz network and tap on Connect.

Your Blink camera will then connect to your 5GHz network.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

5. Update Your Router Firmware

Wireless Router Setup – Upgrade Router Firmware

Router firmware is the programming that makes your router work. It controls everything from your network’s security to your WIFI signal’s performance.

How do you update your router firmware?

Updating your router firmware is a very straightforward process. Here’s how to do it:

  1. Find out the make and model of your router. This information should be printed on the router or on the box it came in.
  2. Go to the manufacturer’s website and look for the firmware download page for your router model.
  3. Download the latest firmware update.
  4. Log in to your router’s settings page.
  5. Find the firmware update setting.
  6. Select the downloaded firmware update file and click the update button.
  7. Wait till the update process finishes.

Once the firmware update is complete, your router will reboot. Once it has rebooted, you should be connected to the internet using the new firmware.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

6. Update Your Blink Camera Firmware

Blink GO Firmware Update: Do’s and Don’ts

Blink camera firmware is the software that runs on your Blink camera. It’s responsible for various tasks, including connecting to your WIFI network, streaming video, and recording events.

How to update your Blink camera firmware?

To update your Blink camera firmware, follow these steps:

  1. Open the Blink app.
  2. Tap the Settings icon in the top right corner of the screen.
  3. Tap the device that you want to update.
  4. Tap Firmware Update.
  5. If available, tap Download and Install.
  6. Your Blink camera will begin downloading and installing the update. This process may take a few minutes.
  7. Once the update is complete, your Blink camera will restart.

Why is it important to update the firmware?

Keeping your Blink camera firmware up to date is important for several reasons:

  • Improved performance: Firmware updates can help improve your Blink camera’s performance by fixing bugs and optimizing the software. This can result in faster startup times, more reliable connections, and better video quality.
  • New features: Your Blink camera’s firmware upgrade may provide updated features. For example, a recent firmware update added the ability to record motion clips with audio.
  • Security fixes: Firmware updates can also include security fixes to protect your Blink camera from vulnerabilities.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

7. Turn Off Other Wireless Devices

If you have a lot of other wireless devices in your home, this could be causing interference with your Blink camera’s WIFI signal. This is because wireless devices use the same radio frequencies to communicate. If there are too many devices using the same frequencies, this can cause interference.

To fix this, try turning off some of your other wireless devices, especially if they are close to your Blink camera. Some common wireless devices that can interfere with Blink camera WIFI signals include:

  • Microwaves
  • Cordless phones
  • Baby monitors
  • Bluetooth devices
  • Smart TVs
  • Game consoles
  • Wireless printers

If you need help determining which devices are causing interference, try turning off all of your wireless devices and then turning them back on one by one to see which is causing the problem.

Once you’ve identified the devices causing interference, you can move them away from your Blink camera or turn them off when you’re not using them.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

8. Use a Wired Connection

To use a wired connection with your Blink camera, you will need an Ethernet cable. An Ethernet cable is a sort of cable that is used to connect devices to a network. Ethernet cables are typically blue or gray in color and have a connector on each end.

To connect your Blink camera to your router using a wired connection, follow these steps:

  1. Plug one end of the Ethernet cable into the Ethernet port on the back of your Blink camera.
  2. Connect the other end of the Ethernet cable to an Ethernet port on your router.
  3. Once the Ethernet cable is connected, your Blink camera will automatically connect to your network.

Once your Blink camera is connected to your network using a wired connection, you should see a solid green light on the front of the camera. If you see a blinking green light, the camera still tries to connect to the network.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

9. Contact Blink support

If you’ve tried all of the above and you’re still having trouble with your Blink camera’s WIFI signal, you can contact Blink support for help. Blink support can help you to troubleshoot the issue and find a solution.

Continue reading How to Fix Low and Weak WIFI Signals to Blink Camera.

Additional Tips

Use Powerline Adapter

A powerline adaptor is a device that sends data across the electrical wiring in your house. This can be a good option if you have thick walls or other obstacles blocking your WIFI signal.

To use a powerline adapter to connect your Blink camera to your router, plug one powerline adapter into an electrical outlet next to your router and connect it to the router using an Ethernet cable. Then, plug another powerline adapter into an electrical outlet near your Blink camera and connect it to your Blink camera using an Ethernet cable.

Once you have connected the powerline adapters to your router and Blink camera, your Blink camera will be able to connect to your WIFI network through the powerline adapters.

Use WIFI Analyzer App:

A WIFI analyzer app can help you to identify the best spot to place your Blink camera by showing you the strength of the WIFI signal in different areas of your home.

Many different WIFI analyzer apps are available for Android and iOS devices. Some popular options include:

  • WIFI Analyzer by Ubiquiti Labs
  • WIFI Analyzer by farproc
  • Network Analyzer by Techet

To use a WIFI analyzer app, install it on your device. Then, open the app and start walking around your home. The app will show you the strength of the WIFI signal in different areas.

Once you have identified a spot with a strong WIFI signal, place your Blink camera in that location.

By following these tips, you can improve the wifi signal strength of your Blink camera and ensure that it can always receive a strong signal.

How to keep your Blink camera safe from hackers

FAQs about Blink Camera

How do I set up my Blink camera to record at night?

To set up your Blink camera to record at night, go to the camera settings in the Blink app and enable night vision. You can adjust the night vision sensitivity and brightness for the best results.

Can I use my Blink camera without a WiFi connection?

Yes, you can use your Blink camera without a WiFi connection. Still, you will need to purchase a Blink Sync Module 2 because the Sync Module 2 can store video clips locally on a USB drive.

Can I use my Blink camera outdoors?

Yes, some Blink cameras are designed for outdoor use. These cameras are weatherproof and can be powered by batteries or a USB adapter.

How long do Blink camera batteries last?

Blink camera batteries can last up to two years on a single set, depending on your usage and settings.

Can I share my Blink camera with others?

Yes, you can share your Blink camera with others by inviting them to your Blink system. Once they have accepted your invitation, they can view and record video from your camera.

Can I use my Blink camera to track my pet?

Yes, you can use your Blink camera to track your pet by setting up a motion detection zone in the Blink app. You can also receive notifications on your phone when your pet enters the zone.

Can I use my Blink camera to monitor my home while I’m on vacation?

Yes, you can use your Blink camera to monitor your home while you’re on vacation by setting up live view streaming in the Blink app. Also, get notified when your camera spots something.

Can I use my Blink camera to record audio?

Yes, most Blink cameras have built-in microphones so you can record audio and video. You can enable audio recording in the Blink app.

Can I use my Blink camera to save video clips to my phone?

Yes, you can save video clips from your Blink camera to your phone by using the Blink mobile app. Just tap on the video clip you want to save and select “Save to phone.”

Can I use my Blink camera with other smart home devices?

Yes, Blink cameras are compatible with various smart home devices, including Amazon Alexa, Google Home, and Apple HomeKit. You can use these devices to control your Blink cameras with voice commands.

Can I use my Blink camera as a security camera?

Yes, Blink cameras can be used as security cameras. They have various features ideal for security use, such as motion detection, night vision, and two-way audio.

How do I choose the right Blink camera for my needs?

There are a variety of Blink cameras available, each with its own unique features. Consider your needs and budget when choosing a Blink camera.

How do I install a Blink camera?

Blink cameras are easy to install. Most Blink cameras can be mounted on a wall or shelf using the included mounting bracket. You can also use an optional Blink camera stand.

How do I troubleshoot a Blink camera?

If your Blink camera is acting up, give it a fresh start by restarting the camera and router, checking battery levels, ensuring range, and exploring support resources.

Can I return my Blink camera if I’m not happy with it?

Yes, Blink offers a 30-day money-back guarantee on all of its products. If you are unhappy with your Blink camera, you can return it for a full refund.

Can I use my Blink camera to deter crime?

Yes, Blink cameras can deter crime by making your home look more secure. You can also use Blink cameras to record evidence of a crime, which can help the police to investigate.

Can I use my Blink camera to monitor my business?

Yes, Blink cameras can monitor your business by setting up live view streaming in the Blink app. You will also get a notification or alert when your camera spots motion or sound. 

Can I use my Blink camera to keep an eye on my elderly parents?

Yes, Blink cameras can be used to keep an eye on your elderly parents by setting up live view streaming in the Blink app. You will also get a notification or alert when your camera spots motion or sound.

Can I use my Blink camera to keep an eye on my baby?

Yes, Blink cameras can be used to keep an eye on your baby by setting up live view streaming in the Blink app. You will also get a notification or alert when your camera spots motion or sound.

Can I use my Blink camera to record my workout?

Yes, Blink cameras can record your workout by setting up live view streaming in the Blink app. You can also use the Blink app to create a timelapse video of your workout.

Also Checkout:

J. Shaw

Joseph Shaw is a renowned expert with two decades of experience in health and fitness, food, technology, travel, and tourism in the UK. His multifaceted expertise and commitment to excellence have made him a highly respected professional in each field.

J. Shaw has 192 posts and counting. See all posts by J. Shaw

Comments are closed.